SPC Performance 1/4° CASTER/CAMBER BUSHING

This sleeve will easily change Camber and/or Caster .25° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free...

SPC Performance 10 PIECE TORQUE STIX SET - 76900

Ten piece set includes: #76610, #76615, #76620, #76625, #76630, #76635, #76640, #76645, #76650, #76655.These Torque Stix are low cost and efficient. There is nothing to calibrate or maintain and the...

SPC Performance 14x16mm Slot Punch Tool

Turn any 9/16" [14 mm] hole into a precise and clean 16mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into...

SPC Performance 1° SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 1.00° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change...

SPC Performance 2 deg. 4X4 Camber / Caster Sleeve

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

SPC Performance 2 deg. CAMBER/CASTER Sleeve

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC Performance 2 deg. SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 2.00° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change...

SPC Performance 2.3° SLEEVE for FORD SUPER DUTY

These sleeves have a fixed postive camber and caster change and are designed specifically to align trucks that have been lifted or to provide more caster change than our standard 23220 series. For...

SPC Performance 2.6 deg. Sleever for FORD SUPER DUTY

These sleeves have a fixed postive camber and caster change and are designed specifically to align trucks that have been lifted or to provide more caster change than our standard 23220 series. For...

SPC Performance 3-1/4° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC Performance 3/4 deg. 4X4 Camber / Caster Sleeve

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

SPC Performance 3/4 deg. SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 0.75° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree...