Synergy Replacement Double Adjuster Sleeve 7/8-14 (Zinc Plated)

Synergy Replacement Double Adjuster Sleeve 7/8-14 (Zinc Plated) Replacement Double Adjuster Sleeve for all Synergy Items that use Double Adjuster Assemblies. See table below for adjuster sleeve part number that matches the item you are trying to replace...

Synergy Caster Sleeves for 2005+ Ford F-250/F-350 Super Duty 4x4

Synergy 2005+ Ford F-250/F-350 Super Duty 4x4 Caster Sleeves

Synergy Fox Shock Eyelet Sleeve for 05-16 Ford F-250/F-350 Super Duty 4x4

Synergy 05-16 Ford F-250/F-350 Super Duty 4x4 Fox Shock Eyelet Sleeve The Synergy Fox Shock Eyelet Sleeve allows you to adapt the late model Ford Super Duty shock (2017+) to earlier model applications (2005-2016). We use this part in the Synergy Ford...

SPC Performance ADJUSTABLE TRUCK SLEEVE

Inventory getting out of hand? Just need to fill in a few odd sizes? Adjustable Sleeves maybe just what you need. This sleeve can adjust camber and/or caster in a large variety of combinations. Replaces up to 5 stock 23120 sleeves.Adjustment range:Cam...

SPC Performance 1-3/4 deg. 4X4 Camber / Caster Sleeve

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC Performance 2 deg. 4X4 Camber / Caster Sleeve

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC Performance 1-1/4 deg. Camber / Caster Sleever for Ford

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC Performance 1-1/2 deg. FORD SLEEVE

Correct front caster and camber ±1.50° on medium duty Ford trucks. Other sleeve sizes are also available, see below.Part No. / Total Change23221 .25° (1/4 degree)23222 .50° (1/2 degree)23223 .75° (3/4...

SPC Performance 1-1/4 deg. FORD SLEEVE

This truck sleeve will correct caster and camber ±1.25° on trucks equipped with the Dana Super 60 solid axle, such as the F450, F550 and GM Topkick. Other sleeve sizes are also available, see below.Part No. / Total Change23231 .25°...

SPC Performance 3/4 deg. 4X4 Camber / Caster Sleeve

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...

SPC Performance 1-1/2° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/or camber on many Ford and Mazda 2/4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to remove...

SPC Performance 1 deg. 4X4 Camber / Caster Sleeve

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero...