SPC Perf Pro Series Front Passenger Adj. Upper Control Arm for 88-96 Corvette C4

Adjust camber and caster for maximum handling and performance with our adjustable arms for Corvettes, Impalas and 'Tri-5' Bodies. Arms include a steel cross shaft with street style or race pivots and...

SPC Performance (WA374) TOE GAUGE (39"-60") - 99374

Extends 39-60" for standard & compact cars. Spring loaded gauge easily adapts to a variey of tread widths in order to give fast, accurate toe readings. California Residents WARNING

SPC Performance (WA918) WHEEL SPREADER

Take the play out of front wheels during alignment! Place this spring-loaded pressure bar between the front tires to assure a more accurate alignment. Due to manufacturers recommendation to simulate...

SPC Performance +.50 Camber Shim (Set of 2) for 09-14 Hyundai Genesis

Adjust front camber +-.50deg on the Hyundai Genesis Sedan, Equus, and Kia K900 vehicles with this aluminum full contact shim from SPC. Whether you want negative camber for the track or positive...

SPC Performance +.75 Camber Shim (Set of 2) for 09-14 Hyundai Genesis

SPC Performance 09-14 Hyundai Genesis +.75 Camber Shim (Set of 2) GENESIS FR CAMBER SHIM +-0.75deg plus or minus 75 degrees Camber plus or minus .75 degrees

SPC Performance .50 deg. CAMB/TOE SHIM - 71024

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over...

SPC Performance 0 Deg. Camber Sleeve for Jeep Wrangler JL

Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to knuckle. Simply determine what degree offset sleeve is already in the knuckle and...

SPC Performance 1 deg. 4X4 Camber / Caster Sleeve

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

SPC Performance 1 deg. SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 1.00° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree...

SPC Performance 1-1/2 deg. FORD SLEEVE

This sleeve will easily change Camber and/or Caster 1.50° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree...

SPC Performance 1-1/2in. OPEN END WRENCH

These wrenches makes presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned...

SPC Performance 1-1/2° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...