SPC Performance 1-1/2° FORD CAM/CAS SLEEVE

This sleeve will easily change Camber and/or Caster 1.50° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the...

SPC Performance 1-1/4 deg. Camber / Caster Sleever for Ford

This sleeve will easily change Camber and/or Caster 1.25° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the...

SPC Performance 1-1/4 deg. FORD SLEEVE

This sleeve will easily change Camber and/or Caster 1.25° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change...

SPC Performance 1-1/4in. BOX END WRENCH

These wrenches make presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. California Residents WARNING

SPC Performance 1-1/4° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC Performance 1-3/4 deg. 4X4 Camber / Caster Sleeve

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

SPC Performance 1.5" Jounce Shock - 25710

Double your suspension capacity: 6" long base unit is great for tight spaces with 1:1,2:1 or 3:1 motion ratios. California Residents WARNING

SPC Performance 1/2 deg. 4X4 BUSHING for 69-74 Chevy Blazer

This sleeve will easily change Camber and/or Caster .50° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free...

SPC Performance 1/2 Deg. Camber Sleeve for Jeep

Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to knuckle. Simply determine what degree offset sleeve is already in the knuckle and...

SPC Performance 1/2 deg. SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 0.50° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree...

SPC Performance 1/4 Deg. Camber Sleeve for Jeep

Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to knuckle. Simple determine what degree offset sleeve is already in the knuckle and...

SPC Performance 1/4 deg. Sleeve for FORD

This sleeve will easily change Camber and/or Caster .25° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change...