SPC Performance BUSHING PRESS SET (29 PCS )

Service a wide range of bushings with this versatile press set. Our 29 piece kit will allow you to efficiently remove and install bushings from 1 1/2" to 3" OD (36-80mm ). Save time by servicing the suspension bushings on the vehicle vs. removing...

SPC Performance CAM BOLTS (4) for GM TRUCK

These heavy duty cams replace the upper control arm mounting bolts. Remove the O.E. bolts and replace with cams, rotating them to provide camber and/or caster adjustment. It may be necessary to remove O.E. slugs and elongate the bolt holes with 74910...

SPC Performance 1-1/4° CAMBER/CASTER SLEEVE

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to...

SPC Performance CASTER/PINION CAMS-2 for JK Wrangler

These cams replace the front axle bolts to provide caster and pinion angle (up to 3 degree total change). To elongate the OEM bolt holes use our knock out punch - # 74910. Front caster will change as you agjust pinion angle. Use our offset pin joints...

SPC Performance 4 PC SPRING LOADED SILENCER

Replacement for Ammco #9800 Spring Loaded Silencer.

SPC Performance Front Cam Bolt (2) for 98-04 Nissan Frontier

Replace siezed or damaged factory cams on 1998 - 2004 Nissan Frontier front upper control arms with this replacement kit and get +-2.00deg of camber and caster adjustment. California Residents WARNING

SPC Performance Upper Camber/Caster Kit for 11+ Chevy/GMC 2500HD / 3500HD

Replace corroded or damaged original equipment alignment cams on GM 2500/3500/4500 HD trucks and Chevy Colorados with this cam and bolt kit. SPC's replacement camber & caster cam kit includes a provision for 3/8" drive ratchet wrench when the bolt head...

SPC Performance X-AXIS SEALED FLEX JOINT

The xAxis Sealed Flex Joint is a technology step-up for suspension joints and linkages. xAxis delivers reduced compliance vs rubber, improved durability vs spherical bearings, and increased angularity vs urethane. Featuring sealed ends to keep grease...

SPC Performance Caster/Pinion Cams for Dodge

Replace the non adjustable or corroded OE bolts on Dodge 3/4 and 1-ton trucks to get +- 1.5 deg degrees of caster and pinion angle change. Whether the truck is lifted or stock ride height, optimize caster and pinion angles for better tracking and...

SPC Performance Pinch Bolt Kit for Audi

The upper control arm ball joint pinch bolt on the popular Audi A/S 4, 5, 6, and 7 models is frequently corroded and must be cut out when removing or replacing the upper arms. This bolt & nut replacement kit has 720 hour saltspray certified coating to...

SPC Performance Weld-In Ring Kit 1.25 in. ID

Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for...

SPC Performance Hex Tie Rod for Jeep JK Wrangler

This adjustable hex shaped sleeve replaces the round tie rod sleeve on Jeep JK's to assure ease of adjustment without slippage. Recommended when the existing sleeve is damaged or when replacing a tie rod for easy adjustment. California Residents WARNING