SPC Performance TANDEM SHIM-IHC 1/8 (6)

These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box...

SPC Performance TANDEM SHIM-IHC 1/16 (6)

These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box...

SPC Performance VOLVO/WHT SHIM 1/16in. (6)

These shims adjust thrust angle & toe by placing it between the spring hanger and the spring on Volvo/White 4-Spring Suspension. Six shims per box. California Residents WARNING

SPC Performance TANDEM SHIM-IHC 1/32 (6)

These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box...

SPC Performance Rear Adjustable Arms (Set of 5) for Honda/Acura

Use this five (5) link set to adjust camber, toe, set-back, and track width on your Accord, TSX, and many more Honda & Acura models. Whether you are modifying your suspension for the track or getting your alignment angles back after adjusting ride...

SPC Performance EZ Cam XR Bolts (Pair) (Replaces 18mm Bolts)

Make a two bolt strut adjustable up to +-1.75deg camber with the EZCam from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change. SPC's patented EZCams: 1. Make camber changes a...

SPC Performance Adjustable Rear Camber Arm for 09-17 Ford Expedition

Add more adjustment to the rear suspension on your Ford Expedition with this fully adjustable camber control arm. This arm replaces the factory non-adjustable upper control arm and allows easy on-car adjustment to dial in the camber exactly where you...

Fabtech Alignment Cam Bolt Kit

Fabtech Alignment Cam Bolt Kit

SPC Performance AL SHIMS 2.5X5X2.5 deg.(6)

These economical over-the-road heavy duty truck axle shims a re our lowest cost option. With average compression strength and hardness these shims are available in a large variety o f sizes and offer the technician a cost effective means to c orrect...

SPC Performance Camber Shim + -0.25 deg. for Sienna

This full contact shim corrects the camber angle on both AWD and FWD Toyota Siennas. The 71631 provides plus or minus 0.25deg of camber change. The shim series can be stacked (up to 2) for additional camber change or to correct toe at the same time...

SPC Performance Camber Shim + -0.5 deg. for Sienna

This full contact shim corrects the camber angle on both AWD and FWD Toyota Siennas. The 71632 provides plus or minus 0.5deg of camber change. The shim series can be stacked (up to 2) for additional camber change or to correct toe at the same time...

SPC Performance Adjustable Arms (Pair) for Isuzu/GM

Isuzu D-Max and second-generation Chevy Colorado trucks run out of factory camber and caster adjustment when they are lifted. SPC's heavy duty cast replacement arms provide 0deg to +4deg caster change and +-3deg camber change. SPC's patented truck arms...