SPC 3-1/2 Degree Camber / Caster Sleeve - 23194

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to...

SPC 2.5 Degree Camber / Caster Sleeve - 23190

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to...

SPC 1/2 Degree Camber / Caster Sleever - 23182

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use 77880 or 88830 sleeve puller to...

SPC 2-3/4" Camber / Caster Sleeve - 23113

This sleeve will easily change Camber and/or Caster 2.75° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

SPC 1.5 Degree 4x4 Bushing - 23012

This sleeve will easily change Camber and/or Caster 1.50° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change...

SPC 1 Degree 4x4 Bushing - 23008

This sleeve will easily change Camber and/or Caster 1.00° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change...

SPC Performance Rear LCA Replacement Bushing for 00-09 Subaru Outback

Replace the worn bushing on the inboard side of the rear lower control arm on many Subaru models from the 2000's to present. Need the toe cam adjuster too? Check out SPC part number 67668 for many 2000 to 2009 models. Part replaces OE #'s 20254AE01A...

SPC Performance Rear UCA xAxis Sealed Flex Joint Bushing for 07-17 GMC Acadia

Replace failed cross axis balljoints on the rear upper control arm of GM's popular Lambda platform vehicles with SPC's replacement xAxis ball joint. California Residents WARNING

SPC Performance X Axis Sealed Flex Joint for Mustang Cobra - 15645

Replace worn rear knuckle cross axis ball joints on the IRS Mustang Cobra with xAxis joints from SPC Performance. SPC's cross axis ball joints feature highly polished electroless nickel plated balls, corrosion and wear resistant moly impregenated nylon...

SPC Performance XAXIS Balljoint - 15625

The SPC xAxis Sealed Fle Joint reduces compliance, increases angularity, and improves durability vs rubber bushings and other aftermarket options. This variant of the xAxis has an aluminum outer shell making it a material fit for any aluminum control arm...

SPC Performance Rear Upper Ball Joint for 05-07 Five Hundred / 08-09 Taurus

Replace your worn out upper ball joints on the rear suspension on many Ford, Lincoln, and Mercury AWD vehicles with these replacement ball joints from SPC. Ford makes you buy the whole knuckle to replace this joint, but you can save time and money by...

SPC Rear Radius Rods for 14-16 Infiniti Q50/Q70 / 11-13 M36/M56

Replace a word or bent rear Radius Rod (OE# 551B01MA0D) on the Infiniti Q50 and Q70 with SPC's high strength steel stock length control arm. Need set-back adjustment? Consider SPC adjustable link #72250. California Residents WARNING