SPC Performance 1 deg. SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 1.00° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree sleeve to determine the amount of change needed and install...

SPC Performance 1/2 deg. SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 0.50° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree sleeve to determine the amount of change needed and install...

SPC Performance CONTROL ARM BSHGS (2) for K2500

Replace the upper OE bushing with these offset control arm bushings to get +-1.0deg of additional camber change. OE style rubber maintains the original ride characteristics. California Residents WARNING

SPC Performance AL SHIMS 4X6.5X0.5 deg.(6)

These economical over-the-road heavy duty truck axle shims a re our lowest cost option. With average compression strength and hardness these shims are available in a large variety o f sizes and offer the technician a cost effective means to c orrect...

SPC Performance 1/4 deg. Sleeve for FORD

This sleeve will easily change Camber and/or Caster .25° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change needed and install the correct degree sleeve. To split...

SPC Performance 3/4 deg. SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 0.75° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree sleeve to determine the amount of change needed and install...

SPC Performance 2 deg. SLEEVE for FORD

This sleeve will easily change Camber and/or Caster 2.00° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change needed and install the correct degree sleeve. To split...

SPC Performance 1-3/4 deg. 4X4 Camber / Caster Sleeve

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install a zero...

SPC Performance CAMS (4) for FORD EXPLORER

This set of 4 cams allows for quick installation without having to remove the upper control arm bolt. Change camber and caster up to +-1.75deg. California Residents WARNING

SPC Performance 2.6 deg. Sleever for FORD SUPER DUTY

These sleeves have a fixed postive camber and caster change and are designed specifically to align trucks that have been lifted or to provide more caster change than our standard 23220 series. For maximum drivability and to compensate for road crown, use...

SPC Performance 2 deg. 4X4 Camber / Caster Sleeve

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install a zero...

SPC Performance 1-1/4 deg. Camber / Caster Sleever for Ford

This sleeve will easily change Camber and/or Caster 1.25˚ for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...