SPC 1 Degree 4x4 Bushing - 23008

This sleeve will easily change Camber and/or Caster 1.00° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free...

SPC 1.0 degree Nylon Neg Camber Shim for 99-05 VW Golf / Jetta - 00-06 Audi TT

With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a...

SPC 1.5 Degree 4x4 Bushing - 23012

This sleeve will easily change Camber and/or Caster 1.50° for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free...

SPC 1.5 Degree Adjustable Upper Ball Joint for 88-91 Civic / CRX - 04-08 TSX

These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes...

SPC 1.5 Degree Adjustable Upper Ball Joint for 92-00 Honda Civic / 90-01 Integra

These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes...

SPC 1.5 Degree Adjustable Upper Ball Joint for 92-96 Prelude (Front)

These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes...

SPC 1.5 Degree Ball Joint for 06-13 Lexus IS250 - 67530

Designed specifically for the Lexus GS & IS, this ball joint corrects camber up to +-1.5deg. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have...

SPC 1.5 Dgree Ball Joint - 23530

Change caster and camber with this upper offset pin joint that replaces the OEM pin joint. Use Installation Sleeve set 23580 in conjunction with 72509 Ball Joint Press for removal and installation of...

SPC 1/16" Single Slot Tandem Truck Shims - Set of 6 - 35061

These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change toe or thrust angles on Freightliner, Hendrickson and Navistar heavy...

SPC 1/2 Degree Camber / Caster Sleever - 23182

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC 1/8" Caster / Camber Shims - Set of 50 - 47763

1/8" - 7/16" opening Applications Control arm shaft mounting bolts up to 7/16" diameter. Set of 50.

SPC 1/8in. Rear Shim (6 Per Package) (Rear Toe Adjustment) for Corvette

Bring rear toe back into factory specification for C2 and C3 Chevy Corvettes with these stackable shims from SPC. 6 pack of 47173 1/8" shim only. Installation time: .2 hr/side Required: 1 per wheel