SPC 19mm 80 ft/lbs Torque Stix - 76625

These Torque Stix are low cost and efficient. There is nothing to calibrate or maintain and the end result is properly torqued wheels and satisfied customers who demand properly torqued lug nuts...

SPC 2 Degree Ball Joint - 23540

Change caster and camber with this upper offset pin joint that replaces the OEM pin joint. Use Installation Sleeve set 23580 in conjunction with 72509 Ball Joint Press for removal and installation...

SPC 2-3/4" Camber / Caster Sleeve - 23113

This sleeve will easily change Camber and/or Caster 2.75° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the...

SPC 2.5 Degree Camber / Caster Sleeve - 23190

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC 3 Degree Adjustable Upper Ball Joint for 90-97 Honda Accord - 67340

Able to change camber from +1.50deg up to +3.0deg these ball joints are perfect for lowered vehicles. For changes less than +1.5deg check out our Adjustable Ball Joints. These ball joints have the...

SPC 3 Degree Adjustable Upper Ball Joint for 92-00 Civic / 90-01 Integra

Able to change camber from +1.50deg up to +3.0deg these ball joints are perfect for lowered vehicles. For changes less than +1.5deg check out our Adjustable Ball Joints. These ball joints have the...

SPC 3 Degree Camber / Caster Sleeve - 23192

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC 3 Degrees Adjustable Upper Ball Joint for 92-01 Honda Prelude - 67360

Able to change camber from +1.50deg up to +3.0deg these ball joints are perfect for lowered vehicles. For changes less than +1.5deg check out our Adjustable Ball Joints. These ball joints have the...

SPC 3-1/2 Degree Camber / Caster Sleeve - 23194

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC 4 Way Ball Joint Seperator - 37985

This is the highest strength and most versatile Ball Joint Removal Tool on the market. The unique design of the forged 4-Way Ball Joint Separator allows the tool to be adjusted to remove ball joints...

SPC A Body Lower Arms Turular Control Arms (Pair) - 94344

A perfect complement to SPC adjustable upper control arms, these lower arms drop the front end by 1" and feature 1 degree positive caster for a ready-to-run, aggressive stance on many popular '64-'72...

SPC Adjustable 3 Deg Upper Ball Joint for 88-91 Honda Civic / CRX - 04-08 TSX

Able to change camber from +1.50deg up to +3.0deg these ball joints are perfect for lowered vehicles. For changes less than +1.5deg check out our Adjustable Ball Joints. These ball joints have the...